The SD1-G glass application SolidDrive Transducer
IDEAL FOR RETAIL
Available in Titanium, Chrome or Anodized Black Finish.
SOLIDDRIVE
SD-1G-ABG
SOLIDDRIVE SD-1G ACTUATOR IN ANODIZED BLACK GLOSS FINISH FOR GLASS SURFACE
The SD1g attatches to glass and other non-porous surfaces using a double-sided adhesive disk (included). Each SD1g is designed for one channel of audio. An optional equilization module optimizes the SD1g for use on glass. The SolidDrive utilizes patent-pending dual-voice coil technology in an aluminum enclosure to transfer acoustic energy to any substrate with very high-powered neodymium magnets and dual symmetrically opposed motors to convert audio signals into powerful vibrations. Those vibrations are transferred into solid surfaces through direct contact. High-quality, full-range sound is then radiated from the entire surface with a frequency response of 60 Hz to 15 kHz. The symmetrically opposed neodymium magnets and specifically engineered mounting hardware results in hidden planar-source acoustics. The result is acoustical uniformity throughout the listening space.
More Information
​
Color: Black
UPC: 644216214105
Manufacturer: SolidDrive
Manufacturer's Category: The Original SolidDrive
Height: 2.06 in / 52.32 mm
Width/Diameter: 2.3 in / 58.42 mm
Carton Height: 5.5 in / 139.7 mm
Carton Length: 5.25 in / 133.35 mm
Carton Width: 5.25 in / 133.35 mm
Certifications: CE, RoHS, UL1480, UL2043
Enclosure Properties: Anodized Aluminum
Included Accessories: Adhesive Pad
Optional Accessories: Black Heat Sink (SD1-HS-BL)|Passive Equalization Module - Glass (PEM-G)|Junction Box (AC-JB10-XFMR or AC-JB20-XFMR)
Source Inputs: Wire Leads
Shipping Weight: 1.35 lbs / 0.61 kg
Coverage Angle (-6dB @ 2kHz): 120°
Frequency Response (± 10 dB): 60 Hz - 15 kHz Nominal w/o EQ
Frequency Response (± 3 dB): 80 Hz - 10 kHz Nominal w/o EQ
Magnetically Boosted: No
Max. Continuous Power RMS: 30 W
Max. Program Power: 50 W w/ 100 Hz 12 dB octave high-pass
Minimum Impedance (Ω Ohms): 8 Ω
Nominal Impedance (Ω Ohms): 8 Ω
SD-1SM-TI
SOLIDDRIVE SD-1 SURFACE MOUNT ACTUATOR IN TITANIUM FOR WOOD SURFACES
The SD1sm attatches to wood and similar surfaces using included wood screws. Each SD1sm is designed for one channel of audio. An optional equilization module optimizes the SD1sm for use on wood surfaces. The SolidDrive utilizes patent-pending dual-voice coil technology in an aluminum enclosure to transfer acoustic energy to any substrate with very high-powered neodymium magnets and dual symmetrically opposed motors to convert audio signals into powerful vibrations. Those vibrations are transferred into solid surfaces through direct contact. High-quality, full-range sound is then radiated from the entire surface with a frequency response of 60 Hz to 15 kHz. The symmetrically opposed neodymium magnets and specifically engineered mounting hardware results in hidden planar-source acoustics. The result is acoustical uniformity throughout the listening space.
More Information
​
Color: Titanium
UPC: 644216214907
Manufacturer: SolidDrive
Manufacturer's Category: The Original SolidDrive
Height: 2.06 in / 52.32 mm
Width/Diameter: 2.3 in / 58.42 mm
Carton Height: 5.5 in / 139.7 mm
Carton Length: 5.25 in / 133.35 mm
Carton Width: 5.25 in / 133.35 mm
Certifications: CE, RoHS, UL1480A, UL2043
Enclosure Properties: Anodized Aluminum
Optional Accessories: Titanium Heat Sink (SD1-HS-TI)| Passive Equalization Module - Wood/Surface Mount (PEM-W)| Junction Box (AC-JB10-XFMR or AC-JB20-XFMR)
Source Inputs: Wire Leads
Shipping Weight: 1.45 lbs / 0.66 kg
Coverage Angle (-6dB @ 2kHz): 120°
Frequency Response (± 10 dB): 60 Hz - 15 kHz Nominal w/o EQ
Frequency Response (± 3 dB): 80 Hz - 10 kHz Nominal w/o EQ
Magnetically Boosted: No
Max. Continuous Power RMS: 30 W
Max. Program Power: 100 W w/ 100 Hz 12 dB octave high-pass
Minimum Impedance (Ω Ohms): 8 Ω
Nominal Impedance (Ω Ohms): 8 Ω
Sensitivity dB @ 1W/1M: 73.5 dB
Sensitivity dB @ 2.83V/1M: 70 - 75 dB
MSK-1
SOLIDDRIVE MSK-1 ACTUATOR FOR DRYWALL SURFACE
​
The MSK-1 by SolidDrive is an economical hidden planar-source sound transducer designed for sound masking in drywall applications. Featuring a rugged aluminum enclosure with neodymium magnets, the MSK-1 uses technology similar to our patented SD1 transducers to transfer acoustic energy to the substrate. The result is extremely wide and even audio coverage and acoustical uniformity in the listening space. The MSK-1 must be installed using the SD1 mounting bracket, sold separately. Different bracket widths are available to accommodate in-wall stud spacing.
More Information
​
Color: Titanium
UPC: 644216212804
Manufacturer: SolidDrive
Manufacturer's Category: Sound Masking SolidDrive
Height: 2.02 in / 51.31 mm
Width/Diameter: 2.3 in / 58.42 mm
Carton Height: 5.5 in / 139.7 mm
Carton Length: 5.5 in / 139.7 mm
Carton Width: 5.25 in / 133.35 mm
Certifications: RoHS, UL1480, UL2043
Enclosure Properties: Anodized Aluminum
Included Accessories: Conduit Clamp
Optional Accessories: Titanium Heat Sink (SD1-HS-TI)| 12" On-Center Bracket Assembly (SD1-BR12)| 16" On-Center Bracket Assembly (SD1-BR16)|24" On-Center Bracket Assembly (SD1-BR24)| Passive Equalization Module - Drywall (PEM-DW)| Junction Box (AC-JB10-XFMR or AC-JB20-XFMR)
Shipping Weight: 2 lbs / 0.91 kg
Coverage Angle (-6dB @ 2kHz): 120°
Frequency Response (± 10 dB): 70 Hz - 15 kHz
Frequency Response (± 3 dB): 80 Hz - 10 kHz
Magnetically Boosted: No
Max. Continuous Power RMS: 30W
Max. Program Power: 50 W
Nominal Impedance (Ω Ohms): 8 Ω
Sensitivity dB @ 1W/1M: 69 dB
Sensitivity dB @ 2.83V/1M: 69 dB
SD-1DESKTOP-250
SOLIDDRIVE SD1 DESKTOP KIT-250 ACTUATOR DESKTOP KIT WITH SD250 AMPLIFIER FOR ANY SURFACE
The SD1 Desktop Kit-250 is the ideal way to see how the SolidDrive works on any surface including but not limited to glass, metal, wood, ceramics, laminates, and composites. The SolidDrive unit in the kit has a special silicone backing so it will work with virtually any surface without scratching or leaving a mark. The kit includes one SD1 desktop unit, DC power adapter, cables, and SD-250 250 watt mini amp with SolidDrive EQ curves in a convenient carrying case. The SD-250 is an ultra compact 2-channel amplifier with extra heat sink surfaces for extended duty at full power. The amp is rated at 50 watts per channel and can run in stereo, mono, or bridged mono. But most importantly it has custom electronic EQs for glass, sheet rock, wood, or bypass. Having the correct power and the right EQ will make the AD sound its best. The amp can utilize balanced stereo euroblock, stereo unbalanced mini jack, or high level euroblock inputs.
More Information
Color: Black
UPC: 644216214006
Manufacturer: SolidDrive
Manufacturer's Category: The Original SolidDrive
Height: 2.06 in / 52.32 mm
Width/Diameter: 2.3 in / 58.42 mm
Certifications: RoHS
Enclosure Properties: Anodized Aluminum
Included Accessories: 3-Pin Euroblock, 4-Pin Euroblock, Mounting Hardware, Power Supply, Stereo RCA Adapter
Source Inputs: Wire Leads
Shipping Weight: 4.3 lbs / 1.95 kg
Power Requirements: 32 v DC
Voltage Gain: 34 dB
Coverage Angle (-6dB @ 2kHz): 120°
Frequency Response (± 10 dB): 60 Hz - 15 kHz Nominal w/o EQ
Frequency Response (± 3 dB): 80 Hz - 10 kHz Nominal w/o EQ
Magnetically Boosted: No
Max. Continuous Power RMS: 30 W
Max. Program Power: 100 W
Minimum Impedance (Ω Ohms): 7.8 Ω
Nominal Impedance (Ω Ohms): 8 Ω
SD1-TI-XFMR
SOLIDDRIVE SD-1 XFMR SURFACE MOUNT ACTUATOR IN TITANIUM
The SD1-XFMR can be installed into walls and ceilings using our patented cantilever spring mounting bracket. Each SD1-XFMR is designed for one channel of audio. SolidDrive utilizes patent-pending dual-voice coil technology in an aluminum enclosure to transfer acoustic energy to any substrate. Using high-powered neodymium magnets and dual symmetrically opposed motors, SolidDrive converts audio signals into vibrations that transfer into solid surfaces through direct contact. The result is high-quality, full-range sound is then radiated from the entire surface with a frequency response of 60 Hz to 15 kHz. The symmetrically opposed neodymium magnets and specifically engineered mounting hardware provide hidden planar-source acoustics and uniformity throughout the listening space.
More Information
​
Color: Titanium
UPC: 644216215102
Manufacturer: SolidDrive
Manufacturer's Category: The Original SolidDrive
Depth: 2.28
Height: 4.8 in
Width/DiameterMounting Plate: 3.5 in
Optional Accessories: Titanium Heat Sink (SD1-HS-TI)| 12" On-Center Bracket Assembly (SD1-BR12)| 16" On-Center Bracket Assembly (SD1-BR16)| 24" On-Center Bracket Assembly (SD1-BR24)| Passive Equalization Module - Drywall (PEM-DW)
Magnetically Boosted: No
Transformer Options: 10 W Transformer
MSK-1G-T
SOLIDDRIVE MSK-1G-T ACTUATOR FOR GLASS SURFACE
The MSK-1g-T is an economical hidden planar-source sound transducer designed for sound masking in glass-mount applications. Featuring a rugged aluminum enclosure with neodymium magnets, the MSK-1g-T uses technology similar to our patented SD1 transducers to transfer acoustic energy to the substrate. The result is extremely wide and even audio coverage and acoustical uniformity in the listening space. The unit incorporates a 10 watt transformer for use in 70 V installations and is mounted to glass using an adhesive disk.
More Information
Color: Titanium
UPC: 644216213009
Manufacturer: SolidDrive
Manufacturer's Category: Sound Masking SolidDrive
Height: 4.75 in / 120.65 mm
Width/Diameter: 2.3 in / 58.42 mm
Carton Height: 6.5 in / 165.1 mm
Carton Length: 5.5 in / 139.7 mm
Carton Width: 5.25 in / 133.35 mm
Certifications: UL1480, UL2043
Enclosure Properties: Anodized Aluminum
Included Accessories: Conduit Clamp
Optional Accessories: Titanium Heat Sink (SD1-HS-TI)|Passive Equalization Module - Glass (PEM-G)
Shipping Weight: 2.10 lbs / 0.95 kg
Coverage Angle (-6dB @ 2kHz): 120°
Cutout Width/Diameter: 3.5 in / 88.9 mm
Frequency Response (± 10 dB): 80 Hz - 15 kHz
Frequency Response (± 3 dB): 90 Hz - 10 kHz
Magnetically Boosted: No
Max. Continuous Power RMS: 30 W
Max. Program Power: 50 W
Transformer Options: 10 W Transformer
SD250 2-CHANNEL (STEREO) CLASS D AMPLIFIER
SOLIDDRIVE 50 WATTS PER CHANNEL CLASS D AMPLIFIER
The SolidDrive SD-250 is an ultra compact 2-channel amplifier with extra heat sink surfaces for extended duty at full power. The amp is rated at 50 watts per channel and can run in stereo, mono, or bridged mono. But most importantly it has custom electronic EQs for glass, sheet rock, wood, or bypass. Having the correct power and the right EQ will make the AD sound its best. The amp can utalize balanced stereo euroblock, stereo unbalanced mini jack, or high level euroblock inputs.
More Information
​
Color: Black
UPC: 644216215201
Manufacturer: SolidDrive
Manufacturer's Category: Amplifiers
Depth: 4.9 in / 124.46 mm
Height: 1.2 in / 30.48 mm
Width/Diameter: 3.9 in / 99.06 mm
Carton Height: 3.5 in / 88.9 mm
Carton Length: 10.25 in / 260.35 mm
Carton Width: 9.5 in / 241.3 mm
Certifications: CE, RoHS
Enclosure Properties: Aluminum
Included Accessories: 3-Pin Euroblock, 4-Pin Euroblock, Mounting Hardware, Power Supply, Stereo RCA Adapter
Shipping Weight: 3.1 lbs / 1.41 kg
Input Impedance: 47K Ω Line Level, 600 Ω Balanced
Power Requirements: 32 v DC
Voltage Gain: 34 dB
Frequency Response (± 3 dB): 20 Hz - 20 kHz
Magnetically Boosted: No
SD1-BR12
12-in On-Center Drywall Bracket assembly.
​
Patented balanced cantilever spring brackets are required for installations of the SD1 behind drywall. The mounting bracket eliminates stress on the glue bond by balancing the SD1 to eliminate torque and by holding it against the drywall with proper amount of pressure.
More Information
​
Color: Black
UPC: 644216213702
Manufacturer: SolidDrive
Manufacturer's Category: Accessories
Shipping Weight: 0.8 lbs / 0.36 kg
Magnetically Boosted: No
PEM-DW
DRYWALL EQ.
​
​Passive equalization module that is designed to smooth out the frequency response and optimize the sound of the SD1, SD1g, and SD1sm for any type of surface to which they will be attached. One module is needed for each SolidDrive unit. NOTE: Not needed if using the SD-250.
More Information
Color: Black
UPC: 644216213405
Manufacturer: SolidDrive
Manufacturer's Category: Accessories
Magnetically Boosted: No
SD1-HS-CR
Heat sink for SolidDrive.
​
Heat sink fins clamp around the drive to disperse heat. Heat sink fins are recommended in hot-weather locations and in applications where the SolidDrive is attached to a small surface area.
More Information
Color: Chrome
UPC: 644216214501
Manufacturer: SolidDrive
Manufacturer's Category: Accessories
Magnetically Boosted: No